SAARecorder

Step-by-step guides for performing common tasks with Measurand's SAARecorder software.

Performing a Complete Diagnostic Test on a ShapeArray
Measurand's SAARecorder can run a series of diagnostic tests on a connected ShapeArray and generate a text report with the results. This is helpful for...
Fri, 18 Jun, 2021 at 8:49 AM
Saving Raw Data
Measurand’s SAARecorder allows you to view data from a ShapeArray in near real time. As each reading is taken from the ShapeArray, a three dimensional model...
Mon, 3 May, 2021 at 1:59 PM
Verifying your SAAV Installation
Measurand's SAAV is designed to take on a cyclical shape around the inside of the casing as it is installed. To ensure the SAAV is properly seated in t...
Thu, 21 Jul, 2022 at 2:34 PM
Generating New Calibration Files for SAAV Extend
Once an extension has been added to the SAAV Extend base array, a new calibration file and site file must be generated to facilitate the collection and conv...
Mon, 3 May, 2021 at 1:59 PM
Saving a Text Snapshot of SAA Data
At any time when viewing live ShapeArray (SAA) data in the SAARecorder application, or when playing back a recorded raw data file, the Cartesian XYZ locati...
Mon, 3 May, 2021 at 1:59 PM
Disabling SAAScan Segments
Often when you are using SAARecorder to take readings from an SAAScan, some number of segments will remain on the reel outside of the borehole. When generat...
Mon, 3 May, 2021 at 1:59 PM
Generating Scan Reports
Measurand's SAAScan instrument and SAARecorder software can be used to generate a report of borehole deviation called a Scan Report. SAAScans are ...
Mon, 3 May, 2021 at 1:59 PM
Exporting Raw Data to ShapeArray™ Viewer
Raw data recorded in SAARecorder as .rsa files can be converted to a multi_saa_allcart.mat file that can be opened in Measurand’s ShapeArray™ Viewer applic...
Mon, 3 May, 2021 at 2:00 PM
Exporting Raw Data to a Text File
SAARecorder saves raw data to .rsa files. The data in these files can be exported to a variety of formats including a text format where the data values are...
Mon, 3 May, 2021 at 2:00 PM
Changing a ShapeArray's Power Mode
Measurand ShapeArrays with serials numbers greater than 350000 support a low power mode for use with various low power wireless logging systems such as RST&...
Tue, 3 May, 2022 at 8:23 PM